Deklip Push-Mount Wire Clip Series 029 and 030

Material: Nylon

Flammability Rating: 94V-2

Quick Lock/Release Feature
For contaminated, high heat, and heavy vibration areas.
Push mount Deklips are used in a wide variety of environmental conditions and on any surface up to .150" (3,81 mm) thick.
Just snap into a .250" (6,4 mm) hole and the push mount will hold 25 lbs. continuous load and 50 lbs. impact load.
Holds a minimum of .187" (4,7 mm) diameter wire bundle and a maximum of a 1" (25,4 mm) bundle.
The clip material, UL 6/6 nylon, is self-extinguishing and will not creep or deform at elevated temperatures.

To install, simply insert base of clip into .250" (6,4mm) hole.

Unique closure operates easily and locks securely. The barbed element assures a positive load retention.

When closed, Deklip will not open until push tab is released. Deklip opens easily without forcing. This permits access to or removal of bundle.

Maximum Wire Bundle Diameter		Part Number	Dimensions
Maximum Wire Bundle Diameter		Part Number	A		B		C		D		E		F
in.	mm.	Gray	in.	mm.	in.	mm.	in.	mm.	in.	mm.	in.	mm.	in.	mm.
Series 029 for Chassis and Panels .020" to .080" Thick
.250	6,4	029-0250	.58	14,7	1.00	25,4	.44	11,2	.41	10,4	.20	5,1	.30	7,6
.375	9,5	029-0375	.65	16,5	1.00	25,4	.53	13,5	.50	12,7
.500	12,7	029-0500	.77	19,6	1.19	30,2	.72	18,3	.60	15,2
.750	19,1	029-0750	.88	22,4	1.38	35,1	.97	24,6	.67	17,0
1.000	25,4	029-1000	1.37	34,8	1.88	47,8	1.30	33,0	1.00	25,4
Series 030 for Chassis and Panels .080" to .150" Thick
.187	4,7	030-0188	.55	14,0	1.00	25,4	.39	9,9	.38	9,7	.20	5,1	.37	9,4
.250	6,4	030-0250	.58	14,7	1.00	25,4	.44	11,2	.41	10,4
.375	9,5	030-0375	.65	16,5	1.00	25,4	.53	13,5	.50	12,7
.500	12,7	030-0500	.77	19,6	1.19	30,2	.72	18,3	.60	15,2
.750	19,1	030-0750	.88	22,4	1.38	35,1	.97	24,6	.67	17,0