Heyco Conduit, Tubing & Fittings Heyco-Flex™ I - Liquid Tight Conduit
Flex I

Material: PVC

Certifications:

File E121096

File 233010

Flammability Rating: VW-1

Temperature Rating: -18°C to 75°C (0°F to 167°F)

 
  • Trade sizes from 3/8" thru 2"
  • Smooth inside for easier wire pulling; no hazardous sharp edges or burrs; will not damage conductors.
  • Lightweight and lower installed cost.
  • Integral rigid and flexible PVC construction.
  • Use with nylon Heyco-Flex™ Fittings and mounting brackets.
  • Also use with NPT Quick Twist fittings (straight or 90°sweep or Quick Twist fittings assembled with an O-ring and locknut).
  • May also be used with Heyco's Metallic Fittings for Liquid Tight Conduit (straight or 90° sweep).
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • Resists abuse, pull and crushing.
  • Approved for direct burial.
  • Sunlight resistant.
  • Suitable for indoor/outdoor use:
    • HVAC Equipment
    • Machine Tools
    • Marine Equipment
    • Motors and Controls
    • Printing Equipment
    • Pumps
    • Refrigeration Equipment
  • Temperature Ratings:
    • 80°C (176°F) Dry
    • 70°C (158°F) Oil Resistance
    • 60°C (140°F) Wet Locations
  • Passes submersion test of 70 psi.
  • Voltage rating: 600V
  • Use cutting tool Part No. 8340 for cutting Heyco-Flex™ conduit cleanly and evenly.
Heyco-Flex I Liquid Tight Conduit
Flexible, Nonmetallic Liquid Tight Electrical Conduit
Trade Size Part Number Description Part Dimensions Coil
Length
A
Outside Diameter
B
Inside Diameter
Gray Black in. mm. in. mm. feet
3/8 8430 8430B HF1 3/8   .700 17,8   .494 12,5 100
1/2 8431 8328   HF1 1/2   .830 21,1   .632 16,1 100
3/4 8432 8432B HF1 3/4 1.040 26,4   .830 21,1 100
1 8433 8433B HF1 1 1.303 33,1 1.054 26,8 100
1-1/4 8434 8434B HF1 1-1/4 1.645 41,8 1.395 35,4 100
1-1/2 8435 8435B HF1 1-1/2 1.883 47,8 1.588 40,3 50
2 8436 8436B HF1 2 2.358 59,9 2.033 51,6 50
 

Part #8340, VF-28 Cutting Tool

Cutting Tool

  • A versatile and economical tool that easily cuts polyethylene, rubber hose, and tubing up to 1.5" (38,1 mm).
  • Also ideal for PVC pipe and other non-metallic materials up to 1-1/4" (31,8 mm).
  • Clean cut every time.
  • Tough nylon handles.
  • Durable and dependable.