Heyco Quick Twist Snap-In Sweep Connectors

Material: 6/6 Nylon

Certifications:

File E121095

Flammability Rating: 94V-2

Material Temperature Index: 125°C (257°F)–Max. temperature on part not to exceed 105°C (221°F)

Snap-In connectors are UL approved for use the Heyco-Flex™ II tubing.
One-Piece solution with smooth internal surfaces provides for easy wire routing, protection and installation.
All nylon construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and other common solvents. This feature is not assessed by UL certification and testing.
Easy, permanent assembly; the installer twists the tubing over the connector ferrule, until the tubing clicks into place.
No tools necessary for installation.
Unique locking fingers accommodate various panel thicknesses.
Suitable for a wide array of electrical applications:
- Commercial and Industrial HVAC systems
- Motorized Equipment
- Enclosed Power Sources
- Garage Door Openers
- Major Appliance
Use finishing collars to neaten rough cut tubing ends.

Heyco-Flex^™ "Quick Twist" Conduit Fittings
90° Sweep, Snap-In Hubs
For use with Heyco-Flex^™ II Tubing
Fits Tubing Trade Size	Part Number	Description	Part Dimensions
3/8	8500	8501	HFC 3/8-S-90 Twist	.875	22,2	1.754	44,6	2.749	69,8	.390	9,9	1.23	31,2
1/2	8505	8506	HFC 1/2-S-90 Twist
3/4	8510	8511	HFC 3/4-S-90 Twist	1.093	27,8	1.965	50,0	3.081	78,3	1.50	38,1

Heyco-Flex™ "Quick Twist" Finishing Collars
For Use with Heyco-Flex™ I and II Conduit Fittings
Fits Conduit / Trade Size	Black	Gray	Description
Fits Conduit / Trade Size	Part Number		Description
3/8	8474	8482	HFC Twist 3/8 Collar
1/2	8475	8483	HFC Twist 1/2 Collar
3/4	8476	8484	HFC Twist 3/4 Collar