Heyco Bumpers & Feet Rubber Push-In BumpersType D
Type D Rubber Push-In Bumper

Material: SBR

Temperature Rating: -40°F to 221°F (-40°C to 105°C)

 
  • Rubber bumpers designed for through hole installation.
  • Designed to fit snugly into your opening and not let air, water, etc. pass through.
  • Can also be used as feet.
  • Part Description Key:RGB X-Y-Z where
    • X = Mounting Hole Diameter (inches),
    • Y = Base Diameter (inches) and
    • Z/32 = Base Height (inches)
Heyco® Rubber Push-In Bumpers
Type D
Panel Dimensions Part
Number
Description Part Dimensions
Mounting
Hole Diameter
Maximum
Thickness
A
Base Diameter
B
Base Height
C
Insert Diameter
D
Insert Height
in. mm. in. mm. Black in. mm. in. mm. in. mm. in. mm.
.218 5,5 .09 2,4 G2016 RGB 218-406-6 .41 10,3 .18 4,6 .28   7,1 .09 2,4
.250 6,4 .05 1,2 G2020 RGB 250-500-6 .50 12,7 .17 4,3 .31   7,9 .19 4,7
.312 7,9 .06 1,6 G2035 RGB 312-375-5 .38   9,5 .16 4,0 .38   9,5 .16 4,0
.328 8,3 .09 2,4 G2039 RGB 328-846-6 .85 21,5 .19 4,7 .42 10,7 .27 6,7
.500 12,7   .13 3,2 G2043 RGB 500-1000-6 1.00   25,4 .19 4,7 .63 15,9 .13 3,2