Flexicon Conduit/Tubing Mounting Clips

Material: Polyamide Nylon 6/6

Certifications:

Approved as per BS EN50086

Flammability Rating: 94V-2 and Low Fire Hazard Including Low Smoke, Low Toxicity as well as Halogen, Sulphur, and Phosphorous Free.

Temperature Rating: Meets or exceeds that of all Flexicon conduit/tubing

For use with Flexicon corrugated conduit/tubing.
Suitable for use with both fine and/or coarse pitch conduit/tubing.
For mounting Flexicon corrugated conduit or tubing securely into place, vertically or horizontally.
Only fingertip pressure is required to snap conduit or tubing into bracket.
Suitable for use by original equipment manufacturers.
Low profile design for space savings and pleasing appearance.
Recommended distance between brackets at intervals not greater than 3 feet (.914M) as required by Article 351-27 of 1996 NEC.
Use one standard #10 (4-5M) screw for attaching bracket to panel or chassis (screw not included).
Resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing.
Can be easily opened for temporary access/removal and closed again to secure conduit.