Heyco Liquid Tight Cord Grips Aluminium Cordgrips90° AngleNPT Hubs
Angled Aluminum Cord Grip

Material: Aluminum with Neoprene Sealing Gland and Viton® O-Ring

Certifications:

File E51579

File 258093

Flammability Rating: 94V-2

Temperature Rating: -40°C to 121°C (-40°F to 250°F)

Ingress Protection Rating: IP 67

 
  • Aluminum construction provides excellent durability and performance for most industrial applications.
  • For use in both indoor and outdoor applications to prevent cable pull-out, control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture, and coolants.
  • IP 67 rated.
  • Approved for NEMA 6 applications.
  • Protect cable from damage and pull-out and are used in conduit hubs or knock-outs at the point where the electrical cable is to be terminated.
  • Unique design with a combination tightening surface that includes both a hex area and a knurled surface.
  • Anti-friction washer allows for easier compression.
  • Torque recommendations.
  • O-Rings, or sealing washers are available.
  • Locknuts sold separately.
Heyco®-Tite Cast Aluminum Liquid Tight Cordgrips
Right Angle, NPT Hubs
The Ultimate in Liquid Tight Strain Relief Protection
Sweep Design
Cable Diameter Range Part
Number
Thread Size Part Dimensions
in.- Max. Min.- Max. A
Clearance Hole Dia.
B
Max. O.A. Length
C
Thread Length
D
Wrenching Flat Size
in. mm. Cast
Aluminum
in. mm. in. mm. in. mm. in. mm.
.125 - .188 3,2 - 4,8 M5230 3/8" NPT .68 17,3 2.00 50,8 .44 11,2 .88 22,4
.188 - .250 4,8 - 6,4 M5231
.250 - .312 6,4 - 7,9 M5232
.312 - .375 7,9 - 9,5 M5233
.375 - .438 9,5 - 11,1 M5234
.125 - .188 3,2 - 4,8 M5235 1/2" NPT .88 22,4 2.39 60,7 .56 14,2 1.13 28,7
.188 - .250 4,8 - 6,4 M5236
.250 - .312 6,4 - 7,9 M5237
.312 - .375 7,9 - 9,5 M5238
.375 - .438 9,5 - 11,1 M5239
.438 - .500 11,1 - 12,7 M5240
.500 - .562 12,7 - 14,3 M5241
.562 - .625 14,3 - 15,9 M5242
.438 - .500 11,1 - 12,7 M5243 3/4" NPT 1.09 27,7 2.88 73,2 .59 15,0 1.37 34,8
.500 - .562 12,7 - 14,3 M5244
.500 - .625 12,7 - 15,9 M5245
.562 - .688 14,3 - 17,5 M5246
.625 - .750 15,9 - 19,1 M5247
.688 - .812 17,5 - 20,6 M5248
.500 - .562 12,7 - 14,3 M5249 1" NPT 1.38 35,1 3.13 79,5 .60 15,2 1.56 39,6
.500 - .625 12,7 - 15,9 M5250
.562 - .688 14,3 - 17,5 M5251
.625 - .750 15,9 - 19,1 M5252
.688 - .812 17,5 - 20,6 M5253
.750 - .875 19,1 - 22,2 M5254
.812 - .938 20,6 - 23,8 M5255
.875 - 1.000 22,2 - 25,4 M5256
O-Ring and locknut not included.