Heyco Power Components Crimp-On Wire Connectors
Crimp-On Wire Connectors

Material: Nylon 6/6 and brass

Certifications:

File E80121

Flammability Rating: 94V-0

Temperature Rating: 105°C (221°F)

 
  • Quick, permanent and secure installation with recommended crimp tool.
  • Five sizes for #10 AWG thru #22 AWG.
  • UL rated at 600 volts except as noted.
  • Closed-end nylon shell with plated brass internal sleeve.
Heyco® Crimp-On Wire Connectors
Wire Combinations Part
Number
Description Use
Crimp
Tool
Part Dimensions
A B C D
AWG in. mm. in. mm. in. mm. in. mm.
JOINS:
1 #16 & 1 #20
Thru 2-5 #22
2986 1622N   0992
(YS-7)
.60 15,2 .23   5,9 .24   6,1 .09 2,4
JOINS:
1 #14 & 1 #18
Thru 2-7 #22
  2988* * 1422DN 0992
(YS-7)
.83 21,1 .32   8,1 .31   7,9 .12 3,0
JOINS:
1 #14 & 1 #18
Thru 2-7 #22
2990 1422N 0992
(YS-7)
.60 15,2 .23   5,8 .26   6,5 .12 3,0
JOINS:
1 #10 & 1 #14
Thru 4 #20
  2992 * 1022N 0992
(YS-7)
.70 17,8 .30   7,6 .37   9,4 .16 4,0
JOINS:
1 #10 & 1 #12
Thru 4 #16
  2994 * 1020N 0993
(YS-8S)
.87 22,2 .41 10,4 .47 12,0 .20 5,1
* Only suitable for stranded #10 AWG (6,0mm) wire.
* * Extra clearance beyond sleeve.

ASSEMBLY TOOLS YS-7 and YS-8S

YS-7
 
  1. Place an insulated closed-end connector onto dies of a corresponding crimping tool by hand and clamp it lightly with the tool to keep it from falling off. (The connector should not be deformed by the clamping.)
  2. Insert a strip end or ends of wire into the connector and push the wire until the wire insulation comes in contact with the outer edge of the connector as shown above. For stranded wire, twist all strands of the conductor together before insertion.
  3. To crimp the connector, close the handles of the tool until it clicks. The ratchet device operates and the dies are released automatically after clicking. The assembly completed.