Heyco Strain Reliefs ST Lockit™ for Round Cable
Lockitâ„¢ for Round Cable

Material: Nylon 6/6

Certifications:

File E15331

File 8919

Flammability Rating: 94V-2

Material Temperature Index: 125°C (257°F)–Max. temperature on part not to exceed 105°C (221°F)

 
  • Assembly friendly! Independent of insertion into the panel, Lockit Strain Reliefs self-lock onto the cable. Preassemble "off line" for final assembly at a later time or remote location, for lower installed cost!
  • Lockit Strain Reliefs hold so well they pass the UL pull-out test requirements with or without panel support.
  • Protect the lifeline of your electric/electronic products by absorbing the forces of push and pull that may be exerted on the flexible power cord. Rectangular design eliminates the possibility of part rotation under forces of twist.
  • Installs easily with fingertip pressure into a standard round or "Double D" hole. No tools required even for hand assembly.
  • Lockit's three-finger design securely anchors into panels as thin as .032" (0,8 mm) and as thick as .157" (4,0 mm) for a neat, clean appearance.
  • Five locking steps accommodate a wide range of panel thicknesses.
  • Low profile head satisfies design aesthetics.
  • Assemble Heyco Lockits™ (excluding ST-201N) with a Lockit plier (Part No. 0020).
  • Heyco nylon strain reliefs are also available in Labkit #1. This handy compartmentalized box provides a working assortment for prototype use in design and engineering groups.
  • Part markings
Heyco® ST Lockit™ Strain Relief Bushings
For Round Cables – Rectangular Mounting Hole
Will Fit These Cables Panel Dimensions Part Number UL/CSA
Designation
UL Type
Designation
AWG/
Conductors
Approximate Size Mounting Hole Size Thickness Color
in. mm. in. mm. in. mm. Black White
SV & SVT 18/2 .220-
.245 
5,6-
6,2 
.453 x .512 11,5 x 13,0 .032
.040
.048
.063
.099
0,8
1,1
1,2
1,6
2,5
1832 1833 ST 101N
18/3
18/3
.250
.255
6,4
6,5
HPD 18/2
16/2
.270
.290
6,9
7,4
HPD 16/2 .290 7,4 .689 x .689 17,5 x 17,5 .032
.063
.099
.126
.157
0,8
1,6
2,5
3,2
4,0
1836 1837 ST 201N
SJ, SJO
& SJT
18/2
16/2
18/3
16/2
18/3
14/2
16/3
18/4
.300
.315
.320
.325
.330
.350
.355
.360
7,6
8,0
8,1
8,2
8,4
8,9
9,0
9,1
SJT 14/2 .355 9,0 .689 x .689 17,5 x 17,5 .032
.063
.099
.126
.157
0,8
1,6
2,5
3,2
4,0
1848 1849 ST 301N
STO 16/3 .390 9,9
SEOW-A 16/4 .420 10,6  

Labkit #1

An assortment of nylon strain reliefs may also be found in Heyco Labkit #1. Labkits contain an assortment of the most common sizes and are ideal for product design and engineering departments.

Heyco® Strain Reliefs
(Part #1999)

Labkit #1