Heyco Strain Reliefs Removable Snap-In, Ratcheting

Material: Nylon 6/6

Certifications:

File E15331

File 8919

Flammability Rating: 94V-2

Material Temperature Index: 125°C (257°F)–Max. temperature on part not to exceed 105°C (221°F)

 
  • Assembly friendly!  Independent of insertion into the panel, the Ratcheting Strain Relief self-locks onto the cable. Thus, it may be pre-assembled offline for final assembly at a later time or remote location, for lower installed cost.
  • Unique wire locking ratchet allows for a generous wire range from .115" to .750" (2,9 mm to 19,1 mm).
  • Can be used for one cable or multiple cables (round or flat wire).
  • Installs easily with fingertip pressure into a standard round or "Double D" hole.
  • Ratcheting strain relief can be easily removed by inserting standard snap ring pliers with .040" tips (Heyco Part ) into the two holes on the part and spreading part open.
  • Ideal solution for managing internal wire bundles wuch as wire harnesses.
  • PN 1280 UL Recognized for multiple cables/conductors.
  • Fill blank/unused mounting holes with Heyco Double D Plugs.
  • Part markings
Heyco® Removable Snap-In Ratcheting Strain Relief
For Round and "Double D" Mounting Holes
Will Fit These Cables Panel Dimensions Part Number UL/CSA
Designation
Body Length
Cross Section Approximate Size Mounting Hole
Diameter
To Prevent
Rotation
Thickness
in. mm. in. mm. in. mm. in. mm. Black White in. mm.
Round, Flat
or Multiple
.115 - .575 2,9 - 14,6 .875 22,2 .770 19,6 .125 3,2 1280 1281 RSR 875 1.00 25,4
Round, Flat
or Multiple
.115 - .750 2,9 - 19,1 1.109 28,2 1.000 25,4 .125 3,2 1282 1283 RSR 1109 1.00 25,4