Heyco Conduit, Tubing & Fittings Heyco-Flex™ Nylon Snap-In Conduit Fittings

1. Push on with a twist     2. Hand tighten

Material: Nylon 6/6

Certifications:

File E28430

File 84579 and 81067

Flammability Rating: 94V-2

Material Temperature Index: Max. temperature on part not to exceed 105°C (221°F)

Ingress Protection Rating: IP 68 up to 70psi (5 bar) water pressure

 
  • Multiple sizes for use with 1/4" thru 1" Heyco-Flex™ conduit and tubing.
  • Assembly friendly. The installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be snapped into the panel with fingertip pressure.
  • Convex ferrule ensures liquid tight seal.
  • No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector and can be easily removed without cutting and without damaging the connector.
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
  • Resists salt water, weak acids, gasoline, alcohol, oil, grease and other common solvent. This feature is not assessed by UL certification and testing.
  • Foam sealing washer included.
Heyco-Flex™ Liquid Tight Conduit Fittings
Straight-Thru, Snap-In Hubs
For Flexible, Nonmetallic Liquid Tight Heyco-Flex™ I Conduit and Heyco-Flex™ II Tubing
Fits
Conduit / Tubing
Trade Size		 Part
Number		 Description Part Dimensions
A
Mounting Hole Dia.		 B
Max O.A Length		 C
Body Length		 D
Wrenching Nut Thk.		 E
Wrenching Flats
Black in. mm. in. mm. in. mm. in. mm. in. mm.
1/4 8382 HFC 1/4-S   .500 12,7 1.500 38,1 .445 11,3 .219 5,6   .875 22,2
3/8 8384 HFC 3/8-S   .875 22,2 2.000 50,8 .625 15,9 .250 6,4 1.328 33,7
1/2 8386 HFC 1/2-S
3/4 8388 HFC 3/4-S 1.090 27,7 2.031 51,6 1.562 39,7
1 8390 HFC 1-S    1.375 34,9 2.250 57,1 .781 19,8 1.812 46,0