Phone (800)-558-4388
Fax (262)-820-1070
Fax (262)-820-1070
PG Hubs
Material: Nickel-Plated Brass with polyamide PA6 finger insert,
TPE Sealing Gland and Buna-N O-ring
Temperature Rating: -40°C to 100°C (-40°F to 212°F)
Ingress Protection Rating: IP 68, IP69K
- Provide the durability of a nickel-plated brass enclosure with drastically lower installed cost and more secure wire gripping with nylon finger design.
- HEYbrid Cordgrips make it possible to insert different diameters of cable in the same cable gland easily, flexibly and with a good seal.
- Movable articulated fingers provide large clamping and sealing areas for secure and flexible everyday use.
- When tightening the compression nut of the cordgrip, the segmented finger design compresses around the gland and wire to provide a torsion proof seal.
- Nickel-plated brass construction for superior protection of flexible cables.
- Nickel-plated finish over brass provides excellent corrosion resistance and durability.
- For use in clearance or threaded holes.
- Multiple sizes for flexible cord diameters ranging from .04" to 1.10" (1,0 mm to 28,0 mm).
- We recommend using the smallest cordgrip that accommodates your cable size.
- Sealing gland is molded in Thermoplastic Polymer Elastomer (TPE) material.
- Locknuts sold separately.
| Cable Diameter Range | Part Number |
Thread Size |
Part Dimensions | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Min.- Max. | Min.- Max. | A Clearance Hole Dia. |
B Max. Overall Length |
C Thread Length |
D Wrenching Flats |
||||||
| in. | mm. | in. | mm. | in. | mm. | in. | mm. | in. | mm. | ||
| .04 - .20 | 1,0 - 5,0 | 4450 | PG 7 | .50 | 12,7 | .87 | 22,0 | .20 | 5,0 | .59 | 15,0 |
| .12 - .28 | 3,0 - 7,0 | 4451 | |||||||||
| .08 - .24 | 2,0 - 6,0 | 4452 | PG 9 | .61 | 15,5 | 1.02 | 26,0 | .24 | 6,0 | .71 | 18,0 |
| .18 - .39 | 4,5 - 10,0 | 4453 | |||||||||
| .14 - .31 | 3,5 - 8,0 | 4454 | PG 11 | .75 | 19,0 | 1.22 | 31,0 | .24 | 6,0 | .87 | 22,0 |
| .28 - .51 | 7,0 - 13,0 | 4455 | |||||||||
| .14 - .31 | 3,5 - 8,0 | 4456 | PG 13.5 | .83 | 21,1 | 1.24 | 31,5 | .26 | 6,5 | .87 | 22,0 |
| .28 - .51 | 7,0 - 13,0 | 4457 | |||||||||
| .14 - .31 | 3,5 - 8,0 | 4458 | PG 16 | .91 | 23,1 | 1.24 | 31,5 | .26 | 6,5 | .94 | 24,0 |
| .28 - .51 | 7,0 - 13,0 | 4459 | |||||||||
| .20 - .43 | 5,0 - 11,0 | 4460 | PG 16 | .91 | 23,1 | 1.48 | 37,5 | .26 | 6,5 | 1.10 | 28,0 |
| .39 - .67 | 10,0 - 17,0 | 4461 | |||||||||
| .28 - .59 | 7,0 - 15,0 | 4462 | PG 21 | 1.14 | 29,0 | 1.57 | 40,0 | .28 | 7,0 | 1.42 | 36,0 |
| .51 - .83 | 13,0 - 21,0 | 4463 | |||||||||
| .59 - .91 | 15,0 - 23,0 | 4464 | PG 29 | 1.48 | 37,6 | 1.89 | 48,0 | .31 | 8,0 | 1.81 | 46,0 |
| .75 - 1.10 | 19,0 - 28,0 | 4465 | |||||||||
For additional sizes see Hybrid Cordgrips – Metric Hubs
| Thread Size | Part Number |
Description | Part Dimensions | |||
|---|---|---|---|---|---|---|
| A Thickness |
B Wrenching Flats |
|||||
| in. | mm. | in. | mm. | |||
| PG 7 | 2257 | Brass LN PG 7 | .110 | 2,8 | .591 | 15,0 |
| PG 9 | 2258 | Brass LN PG 9 | .709 | 18,0 | ||
| PG 11 | 2259 | Brass LN PG 11 | .118 | 3,0 | .827 | 21,0 |
| PG 13.5 | 2260 | Brass LN PG 13.5 | .906 | 23,0 | ||
| PG 16 | 2261 | Brass LN PG 16 | 1.024 | 26,0 | ||
| PG 21 | 2262 | Brass LN PG 21 | .138 | 3,5 | 1.261 | 32,0 |
| PG 29 | 2263 | Brass LN PG 29 | .158 | 4,0 | 1.615 | 41,0 |
| PG 36 | 2268 | Brass LN PG 36 | .197 | 5,0 | 2.009 | 51,0 |
| PG 42 | 2269 | Brass LN PG 42 | 2.364 | 60,0 | ||
Nickel Plated Brass